PRODUCTS
PRODUCTS
Button snap pull tester, to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a button pull tester applies for compression and tensile testing of small samples(special attachments are available). The button snap pull test standard includes ASTM F963, EN 71-1, etc. Snap tester will help you a lot when you do push and pull test.
Product introduction:
Snap Tester (button pull test machine), to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester for compression and tensile testing of small samples(special attachments are available).
This snap button pull test machine consists of an upper snap clamp, a lower fabric clamp as well as a force gauge mounted on a stand, and a hand wheel on the bottom of the snap tester. Besides, all these fasteners pull out test equipment which allows fine control with convenient operation, which makes the pull-out test equipment very easy to use.
Grip the snap component by the Upper Snap Clamp and fix the garment to the lower Fabric Clamp. Then the operator can apply a specific force by turning the hand wheel. Finally, the holding force or the breaking strength can be recorded. The capability of the snap tester can be enhanced with the clamps & accessories for testing other Snaps, Jean Buttons, Four Hole Buttons & Garments Accessories such as Zippers, Bows, Appliqué, Toggles, Hooks/Bars, and D-Rings, amongst others. Apart from those mentioned before, you will find more applications for this push-pull test equipment for your testing purpose.
Working principle:
Clamp the sample with attachments (such as fabrics with buttons, etc.) on the fabric fixture at the bottom of the instrument, select a suitable fixture to install it on the push-pull gauge, hold the attachments, and apply tension to make the attachments Remove the fabric and test its force value; or apply a certain tension value for a certain period of time to test whether the attachment can still be firmly connected to the fabric.
1 Suitable for manufacturers and buyers to use
2 Suitable for children’s clothing, and soft toys
3 Suitable for product design and production inspection
4 The tension is more accurate due to the equipment of the hand wheel
5 Easy to operate, so no need for training the staff
6 Sturdy and durable, thus require less maintenance
Button pull test machine is a simple but effective design mainly consisting of a high precision gauge, a sturdy required by standards & regulations is be fixed horizontally (constant force is applied to secure the sample) so that snap or other accessories attached in fabric can be clamped into.
Moreover, a standard weight is also offered so that it can be regularly checked if it meets the safety requirements.
Push-pull gauge: 300N (optional)
1 Lower Fabric Clamp, Lever Armlocking (on the machine)
1 Upper Stud Clamp
1 Upper Snap Clamp
1 Three-Pronged Clamp
1 Two-Pronged Clamp with screw
1 Lower Grasp Button Kit (on the machine)
1 Long Nose Vice Grip
Standards:
16 CFR 1500.51-53, ASTM WK4510 PS79-96, ASTM F963, EN71-Part1, M&S P115A
Technical parameter:
Dimensions: | 280 x 230 x 735 mm (L×W×H) |
Push-pull gauge: | 30 kg |
Weight: | 35 kg |
Two-claw pliers
| Three-jaw pliers
| Male button clamp
| Female button clamp
| Strong pliers
| Flat Tension Pliers
|

Copy product links
Long by picture save/share

